COMFORT.  ASK YOUR DOCCTOR FOR THE COMFORT YOU DESERVE

IO LAB ORTHOTICS

With the largest shoe selection, best quality devices and competitive pricing.
IO Lab is the clear choice of today's practitioner.

icon_globe
image_sizingChart

INTERACTIVE RX FORM

Our prescription builder was designed to aid practitioners in assembling the right pieces for the desired treatment direction. Simply open up the builder and the step-by-step process will walk you through the construction of your patient’s new orthotics

ORTHOTIC PRODUCTS

A proven company operating since 2006. We are relied on daily for Orthotic products, footwear and cutting edge inventory solutions by many of the leading laboratories, and clinical partners.

 
Accommodative
SHOCK LITE

Materials
1/8" Polypropylene shell, sulcus length ETC top cover, and Jsuede® bottom cover.

Posting
Intrinsic forefoot, integrated rearfoot post.

 
Accommodative
SHOCK PLUS

Materials
1/8" Polypropylene shell, sulcus length ETC top cover, Jsuede® bottom cover, with soft or firm arch reinforcement.

Posting
Intrinsic forefoot, extrinsic rearfoot post.

 
Diabetic
SOLE REMEDY

Materials
Sadmerc approved thermoformed plastazote and eva shell, full length.

Posting
Intrinsic forefoot, integrated rearfoot post.

 
Diabetic
SOLE REMEDY PLUS

Materials
1mm Carbon Flex shell with 1/8” plastazote + 1/16” poron top cover and 1/4” poron arch fill.

Posting
Intrinsic forefoot, extrinsic rearfoot post.

 
Functional
GUARDIAN

Materials
TL-SILVER® Rigid shell with meta length vinyl top cover.

Posting
Intrinsic forefoot, extrinsic

 
Functional
PROTECTOR

Materials
Polypropylene shell with meta length vinyl top cover.

Posting
Intrinsic forefoot, extrinsic crepe rearfoot post.

 
Dress
AVENUE FLAT

Materials
1/8" Polypropylene shell with hole in heel to sit lower in shoe, sulcus length vinyl top cover with Jsuede® bottom cover.

Posting
Intrinsic forefoot posting with no rearfoot posting.

 
Dress
AVENUE PUMP

Materials
TL-SILVER® Semi-Rigid shell with flexible heel cushion (no shell in heel) sulcus length vinyl top cover with Jsuede® bottom cover.

Posting
Intrinsic forefoot posting and flexible heel.

 
Athletic
SOFT SPORT

Materials
2 mm Carbon Flex® shell with full length ETC top cover, 1/8” poron arch fill with 1mm Nyplex underlay.

Posting
Intrinsic forefoot, integrated rearfoot post.

 
Athletic
CONTROL SPORT

Materials
2 mm Carbon Flex® shell with full length ETC top cover.

Posting
Intrinsic forefoot and dual density extrinsic crepe rearfoot post: to provide shock absorption at heel strike and rearfoot motion control for STJ pronation.

 
Athletic
RUNNERS EDGE

Materials
TL-SILVER® Semi-Rigid or Polypropylene shell with full length ETC top cover, and Jsuede® bottom cover.

Posting
Intrinsic forefoot with a three degree varus extrinsic long forefoot post, extrinsic rearfoot post.

 
New Beginnings
New Beginnings

WHITMAN ROBERTS
(Pictured)

GAIT PLATES

HEEL STABILIZERS

Materials and Posting
All made from 1/8” Polypropylene with meta length vinyl top cover Intrinsic forefoot, extrinsic crepe rearfoot post.

BRACES

Fixed stirrup orthosis that allows post injury immobilization and return to function in a single brace.

SURE-01 | STANDARD
L1970/L2280/L2275 - suggested HCPCS code

The original Sure Step Standard is an articulating ankle foot orthosis with a custom footplate, pre-fabricated uprights, custom posting, removable interface pads, and a standard 35mm heel cup. The Sure Step Standard was originally formulated for athletes and still stands as one of the leading braces for lateral ankle instability in all populations.

Casting Requirements:

The Sure Step Standard requires an ankle cast.

model no. SURE-01
SURE-02 | Pro Custom
L1970/L2280/L2275 - suggested HCPCS code

This articulating orthosis has a posterior bar to link the custom uprights to provide greater stability and control. Like the standard, this orthosis comes with removable interface pads and a standard 35mm heel cup. Casting Requirements: The Sure Step Pro Custom requires a mid-calf cast to capture the shape of the patient’s lower leg for the custom uprights.

 
model no. SURE-02
SURE-03 | Dynamic Assist
L1970/L2280/L2275 - suggested HCPCS code

An orthosis made with dynamic Tamarack joints, the Dynamic Assist offers a unique spring effect especially useful for drop foot pathologies. This orthosis comes with a custom footplate with custom posting. The joints allow 15 degrees of dorsiflexion during swing with natural plantar flexion allowed during initial contact and loading response (heel strike). A 90 degree hinge is available for those patients that may experience over-compensation from standard hinges.

Casting Requirements:

The Sure Step Dynamic Assist requires a mid-calf cast to encompass the shape of the patient’s lower leg for the custom uprights.

model no. SURE-03
SURE-07 | Neuropathic CROW
L1960/L2820/L2275/L2340/L2232 - suggested HCPCS code

The Sure Step Neuropathic CROW (Charcot Restraint Orthotic Walker) is a combination of an ankle orthosis and a custom boot. The CROW is designed for patients with ulcers on the plantar aspect of their feet that are slow to heal, or Charcot Degeneration of the foot and ankle. This orthosis accommodates your patient’s particular foot and ankle needs and incorporates a custom pre-tibial shell.

Casting Requirements:

Casting for the Sure Step Neuropathic CROW requires a full calf cast just inferior to the knee. For best results, position the ankle/foot at 90 degrees.

model no. SURE-07
SURE-08 | Variable ROM
L1970/L2820/L2275/L2270/L2220 - suggested HCPCS code

The Sure Step Pro Custom with a unique variable range or motion control ankle joint makes this the most versatile orthosis available to the podiatric community in today’s marketplace. The unique ankle joint allows the practitioner to quickly change the range of motion from permanent fixed position, variable range of motion to complete free plantar/ dorsiflexion action. Especially effective for the changing needs of post-operative to post sprain, strain and Achilles tendon injury management.

Casting Requirements:

The Sure Step Variable ROM requires a mid-calf cast to capture the shape of the patient’s lower leg for the custom uprights.

model no. SURE-08
SURE-15 | Rainer Boot
 
  • 5" or 9" overall height (5" only available with laces)
  • Soft molded leather inner shell
  • Natural molded leather outer shell
  • Light-weight plastic structural shell
  • Padded 1/8" closed cell foam
  • Standard metatarsal length foot plate
  • Standard lace with one velcro closure SURE-15 5"
  • 12.75cm SURE-14 9"
  • 23.00cm
 
 
SURE-09 | Rigid Solid Ankle
L1960/L2820/L2275 - suggested HCPCS code
  • Provides triplanar ankle/foot motion control
  • Medial/lateral ankle stability
  • Post-operative support/protection
  • Knee stability during stance
  • Mild knee kyperextension control

Casting Requirements:

Casting for the Ridgid Solid Ankle requires a full calf cast just inferior to the knee. For best results, position the ankle/foot at 90 degrees.

model no. SURE-09
SURE-10 | Flexible Solid Ankle
L1960/L2820/L2275 - suggested HCPCS code
  • Limits plantar flexion
  • Allows limited dorsi flexion
  • Varus/Valgus ankle stabilty
  • Dorsifl exor weakness

Casting Requirements:

Casting for the Flexible Solid Ankle requires a full calf cast just inferior to the knee. For best results, position the ankle/foot at 90 degrees.

model no. SURE-10
SURE-11 | Plantar Flexion Stop
L1970/L2820/L2275/L2210 - suggested HCPCS code
  • Provides dynamic dorsiflexion
  • controlled adjustable plantar flexion
  • Controls posterior migration of tibia
  • Medial/lateral stability of ankle

Casting Requirements:

Casting for the Plantar Flexion Stop requires a full calf cast just inferior to the knee. For best results, position the ankle/foot at 90 degrees.

model no. SURE-11
SURE-12 | Dorsi Assist
L1970/L2820/L2275/L2210 - suggested HCPCS code
  • Dynamic dorsi flexion assist
  • Passive plantar fl exion resistance
  • Allows smooth plantar flexion from initial heel contact to foot fl at insuring knee stability with presence of mild weakness of quads
  • Contraindicated with spasticity

Casting Requirements:

Casting for the Dorsiflexion Assist requires a full calf cast just inferior to the knee. For best results, position the ankle/foot at 90 degrees.

model no. SURE-12
CONTACT

Integrated Orthotic Lab
1630 E. Northfield Drive, Unit # 400
Brownsburg, Indiana 46112

Phone: 317-852-4640
Fax: 317-852-4684

Email: info@io-lab.com

© 2014 Integrated Orthotic Lab. All Rights Reserved.